Welcome to Zhengzhou Shuguang Machinery Double Shaft Shredder, Metal Crusher, Can Crusher, Integrated Crusher, Stencil Crusher, Metal Shredder Manufacturer!


Mobile wood crusher

Release time: 2018/4/25 8:56:49
A mobile wood crusher is a mobile wood crusher that crushes input wood to produce sheet-like wood fragments, and is characterized in that the mobile wood crusher is provided with a car body provided with a traveling device for moving; A rotary crushing device for crushing the wood to form the wood chips on one end side in the traveling direction of the body; the rotary crushing device is provided on the upper part of the rotary crushing device so as to be rotatable, and is formed on the upper part; A fin-type supply device that is an opening for inputting wood to be crushed; it is provided from a lower portion of the rotary crushing device to the other end side in the traveling direction of the vehicle body, and is crushed by the rotary crushing device A wood chip carrying device which is carried out and discharged to the outside; it is disposed between the rotary crushing device and the carrying device, and drives the traveling device, the rotary crushing device, the fin supply device, and The drive device of the drive source of the unloading device will be described.
Mobile wood crusher
Mobile wood crusher
Mobile wood shredder
New mobile wood shredder
Installation and maintenance of mobile wood crusher
The maintenance of the machine is an extremely important recurring task. It should be closely coordinated with extreme operation and maintenance.
Full-time personnel perform on-duty inspection.
Bixin APP provides online recharge, balance inquiry, and instant placeholder service for members of more than 10 million net fish and Internet cafes [1]
Installation test run:
1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.
2. When installing, pay attention to the main body and the vertical.
3. After installation, check whether the bolts in all parts are loose and whether the main engine compartment door is fastened. If so, tighten it.
4. Configure the power cord and control switch according to the power of the device.
5. After the inspection is completed, carry out a no-load test run, and the test run can be carried out normally.
Maintenance of the machine:
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with bearing life, it directly affects the use of the machine
The service life and operating rate, so the injected lubricant must be clean, the seal must be good, the main oiling place (1) of this machine is turned
Moving bearings (2) Roller bearings (3) All gears (4) Moving bearings, sliding planes.
2. The newly installed rims are prone to loosening and must be checked frequently.
3. Pay attention to whether the parts of the machine work normally.
4, pay attention to check the wear degree of easy-wearing parts, pay attention to replacing worn parts at any time.
5. Put the plane of the bottom frame of the movable device. Dust and other objects should be removed to prevent the movable bearing from being on the bottom frame when the machine encounters unbreakable materials.
Move up, so that a serious accident occurs.
6. The bearing oil temperature rises, and the reason for stopping the inspection immediately should be eliminated.
7. If there is an impact sound when turning the gear, it should be stopped immediately for inspection and eliminated.
  • 双轴撕碎机

    Twin shaft shredder

    Double-shaft shredder, also known as double-shaft shredder or shearing machine shredder, uses a microcomputer (PC) automatic control system, which has the characteristics of low speed, high torque, low noise, etc. , Extra thick and fragile materials.
    Price of twin shaft shredder: 7500-980,000 yuan
  • 金属撕碎机

    Metal shredder

    Large-scale metal shredder equipment specializes in shredding metal buckets, color steel plates, scrap steel and scrap iron crushing, cans shredding, shredding metal pipes, and shredding of used home appliances. After shredding, it is easy to transport and recycle.
    Metal shredder price: 9500-80000 yuan
  • 塑料撕碎机

    Plastic shredder small shredder equipment

    Plastic shredder is also called plastic shredder or plastic shredder. It is an environmental protection equipment for plastic recycling machinery. It is used to shred high-density polyethylene HDPE plastic products and materials.
    Price of plastic shredder: 9300-98000 yuan
  • 轮胎撕碎机

    Tire shredder

    The tire shredder manufacturer is specially designed for shredding and recycling of used tires, which is convenient for transportation and greatly reduces the recycling cost. It is a professional waste tire processing equipment. Can be used to scrap various automobile tires, rubber tires, rubber products, etc., very convenient and efficient.
    Tire shredder price: 8000-98000 yuan
  • [木料粉碎机]木材撕碎机

    Wood shredder

    Wood shredder equipment is a new type of wood crushing equipment developed according to the status of wood recycling. The main raw materials for shredding are miscellaneous wood, scraps, solid wood, wooden pallets, tree techniques, waste wood, and can also be used to shred irregular wood and furniture. Wood shredder video
    Price of wood shredder: 7500-85600 yuan
  • Scrap iron shredder

    Scrap iron shredder

  • Paint bucket shredder

    Paint bucket shredder

Address: 100 meters west of the intersection of Yufa Avenue and Longjiang Road, Shangjie District, Zhengzhou City Tel: + 86-371-67666667 Fax: 0371-68125111 Email: shuguangzhongji@163.com Postcode: 450001

Zhengzhou Shuguang Heavy Machinery Co., Ltd. specializes in the production of metal shredders , plastic shredders, rubber shredders, metal shredders, scrap steel shredders, tire shredders mattallex.com shredder manufacturers