hotline
磨粉配置 > 三环中速超细磨粉机 Position: Home > Milling equipment > Three-ring medium-speed superfine grinding machine
Three Ring Medium Speed Superfine Mill

Three Ring Medium Speed Superfine Mill

Sugon three-ring medium-speed ultra-fine grinding mill is environmentally friendly and clean. It uses a pulse dust collector to capture dust. The wearing parts have a long service life. The grinding rollers and grinding rings are forged from special materials, which is highly efficient and energy-saving. With the same motor power, the output of the jet mill, agitator mill and ball mill is more than doubled. Mainly suitable for medium and low hardness, such as calcite, limestone, dolomite, kaolin, barite, gypsum, clay, talc, magnesite, pyrophyllite and other materials.

First, three ring medium speed superfine mill product introduction

Dawning Three Ring Medium Speed Superfine Mill:

1High safety and reliability. Because there are no rolling bearings and screws in the grinding chamber, there is no problem that the bearings and their seals are vulnerable, and there is no problem that the screws are easy to loose and damage the machine.
2Environmental protection and cleanness. Pulse dust collector is used to capture dust and muffler is used to reduce noise. It is environmentally friendly and clean.
3 The wearing parts have a long service life, and the grinding rollers and grinding rings are forged from special materials, which greatly improves the utilization degree.
4 High efficiency and energy saving, with the same fineness of the finished product and the power of the motor, the output is more than double that of the jet mill, agitator mill and ball mill.
Three-ring medium-speed superfine mill It is mainly suitable for medium and low hardness, such as calcite, limestone, dolomite, kaolin, barite, gypsum, clay, talc, magnesite, pyrophyllite, vermiculite, sepiolite , Graphite, fluorite, bentonite, rectorite, phosphate ore, potassium ore and other hundreds of materials.

Working principle

The working principle of the three-ring medium-speed superfine milling machine is: the main motor drives the main shaft and the turntables of each layer to rotate through the reducer, and the turntable drives dozens of ring rollers to roll and rotate in the grinding ring raceway through the pins. Large pieces of material are broken into small particles by the hammer crusher and then sent to the storage bin by the elevator. The electromagnetic vibration feeder will evenly send the material to the middle of the upper turntable.

After the material is crushed by the first layer, it falls into the second and third layers. The suction effect of the high-pressure centrifugal fan draws external air into the machine. The vortex generated by the rotating turbine in the powder separator makes the coarse particles fall back and regrind. The fine powder enters the cyclone powder collector with the airflow and is discharged through the discharge valve at the lower part of the cyclone powder collector, which is the finished product.

Third, the technical parameters

 

型号 model

HGM8021 HGM8021

HGM9024 HGM9024

HGM10027 HGM10027

HGM10036 HGM10036

平均上班直径mm Average working diameter mm

800 800

900 900

1000 1000

1000 1000

环道数量/ Number of loops / layer

3 3

3 3

3 3

4 4

磨辊数量/ Number of grinding rollers

21 twenty one

24 twenty four

27 27

36 36

主轴转速/rpmin Spindle speed / rpmin

230 230

200 200

180 180

180 180

入料粒度/mm Feed size / mm

20 20

20 20

20 20

20 20

成品粒度范围/ μ m Finished particle size range / μ m

5-47 5-47

5-47 5-47

5-47 5-47

5-47 5-47

成品产量t/h Output of finished product t / h

0.4-4.5 0.4-4.5

0.4-5.5 0.4-5.5

0.6-6.5 0.6-6.5

0.7-7.5 0.7-7.5

安装外形长xx Installation outline length x width x height

LXWXH /m LXWXH / m

13.9x4x6.2 13.9x4x6.2

14.7x4.8x7.2 14.7x4.8x7.2

18x4.6x8.6 18x4.6x8.6

18x4.6x8.6 18x4.6x8.6

整机容量/Kw Machine capacity / Kw

145 145

192 192

263 263

263 263

Related cases
    Zhengzhou Shuguang Heavy Machinery Co., Ltd. mattallex.com

    Address: South of 100 meters west of the intersection of Yufa Avenue and Longjiang Road, Shangjie District, Zhengzhou City